TX-SKY

Transics's SIM card

Set this to ON, if the Transics SIM card is used to establish communication between the device and server, and provide following details:

·       APN1: Access point name (APN) used for the device and server communication.

·       APN2: Alternate access point name (APN) used for the device and server communication.

OR

Set this to OFF, if the non-Transics SIM card is used to establish  communication between the device and server:

·       Non-Transics APN1: Type the Access point name (APN) used for the device and server communication.

·       Non-Transics APN1 user: Type the Username provided for user authentication.

·       Non-Transics APN1 password: Type a password to establish a secured connection between the device and server.

·       Non-Transics APN2: Type the Access point name (APN) used for the device and server communication.

Destination server

Select the server address where data is exchanged.

Destination port

Select the port of destination server.

GSM operator selection

Set this to ON, to allow users to manually set the GSM operator.

PIN code

Type a password to secure the connection.

Secure OTA

Set this to ON, to transfer the data securely.

Autodetect speed

Set this to ON, to detect speed of vehicles automatically.

Speed source

Select the source through which you want to detect the speed of the vehicle.

Note: The Speed source option is available, only if the Autodetect speed option is Off.

Autodetect KM

Set this to On to detect the distance travelled (in KM) by vehicles automatically.

KM source

Select the source through which you want to detect the distance travelled by vehicles.

Note: The KM source option is available, only if the Autodetect KM option is Off.

Autodetect RPM

Set this to ON, to detect the RPM of vehicles automatically.

RPM source

Select the source through which you want to detect the RPM of vehicles.

Note: The RPM source option is available, only if the Autodetect RPM option is Off.

The RPM (revolutions per minute) indicates how fast a vehicle's crankshaft is spinning when the vehicle accelerates or decelerates.

Tacho type

Select the type of tacho devices installed on vehicles.

External card reader

Select the way you want to activate the login.

Tacho login

Set this to ON, to display the details of tacho login logs.

Co-driver

Set this to ON, to allow a co-driver in the vehicles.

IS synchronization

Set this to ON to activate IS synchronization.

Note: The selected activity type must be the same as the tacho state (Work/Rest/Driving).

RDD active

Set this to ON, to activate Remote Data Download for selected device.

RDD for driver

Set this to ON, to activate Remote Data Download for a driver.

Consecutive service time 6h visible

Set these parameters to ON, to view it in the service times module.

Consecutive service time 9h visible

Consecutive working time 6h visible

Consecutive working time 9h visible

Daily work and availability visible

Daily service time visible

Weekly work and availability visible

Weekly service time visible

Monthly service time visible

Daily working time visible

Weekly working time visible

Amplitude continues while resting

·       0 – Amplitude pauses while resting

·       1 – Amplitude continues while resting

Driving interval (sec.)

Type the driving interval (in seconds) that is applicable for drivers.

Standstill interval (sec.)

Type the halt interval (in seconds) that is applicable for drivers.

KM interval (km)

Type the kilometer interval that is applicable for drivers.

Heading interval (degrees in 100)

Type the heading interval (in degrees) that applicable for drivers.

Speed

Type the speed (km per hour) of the vehicle when they start moving.

Time

Type the time (in seconds) when the driving must start.

Distance (100 m)

Distance travelled before driving is detected.

Duration before What happens? appears (sec.)

Time (sec.) after which the question “what happens?” pops-up on the screen. Driver must enter an activity

Duration after What happens? before standstill (sec.)

Time until activity is registered as “Standstill” after the question “What happens” pops up at standstill.

Duration for repeating What happens? (sec.)

Repeats the question “What happens” after x seconds when user closes the pop-up.

Primary connection

Allows primary reefer connection

Second connection

Allows secondary reefer connection

2-way reefer

Allows 2-way connection (sends commands to refrigeration unit)

Delta value

Set this to ‘1’ to activate the Sensor updates when the value is different from previous.

Delta time (sec.)

Set this to ‘0’ for event-based update. Set time value to send update after every x secs.

Delta value report

Delta value report:

·       Set this to ON to send immediate update.

·       Set this to OFF to postpone update until next transmission.

Delta time report

Set this to OFF to postpone update until next transmission

Note: This must be always False for temperature sensors.

Delta value queue option

Select a delta value queue option.

ECO activation

·       ECO Monitor

·       ECO Assistant

·       ECO Monitor and ECO Assistant

ECO version

V1-V4

Anticipation threshold (dm/s²)

Threshold for anticipation (braking) score in Eco Monitor and Eco Assistant.

Idling threshold (sec.)

Threshold for idling (standstill) score in Eco Monitor and Eco Assistant.

RPM threshold (RPM)

Threshold for RPM score Eco Monitor and Eco Assistant.

Speed threshold (km/h)

Threshold for speed (over speeding) score in Eco Monitor and Eco Assistant.

TX-DOCSCAN

·       Activate the scanner option in the Instruction Set

·       Activate the scanner option in the Instruction Set and  Docscanner module or both.

Color setting

Color / black and white / grayscale

Quality

200 – 300 dpi

Allow driver calibration

Allow driver to perform a calibration of the document scanner.

Document browser

Show / hide the document browser module.

Max. file size from device to server (10 KB)

Type the maximum size (in KB) of the files that can be sent from device to the server.

Max. file size from server to device (10 KB)

Type the maximum size (in KB) of the files that can be sent from server to the device.

WTR-WDL-CTR active

Select this to make the following settings applicable to WTR - WDL only, and not to CTR.

·       Time before connecting trailer while driving (min.): Trailer is automatically coupled to vehicle after x min of driving.

·       Time before removing trailer while driving (min.).

·       Trailer is automatically uncoupled from vehicle after x min of driving.

·       Time before removing trailer while standing still (min.).

·       Trailer is automatically uncoupled from vehicle after x min of standing still.

Disconnect at standstill

When standstill is detected, it disconnects the truck / trailer.

CAN add-ons active

Receives data from CAN add-on.

Basic trailer data active

Receives basic information of trailer.

Trailer VIN recognition active

Set this to ON, to recognize trailers based on trailer VIN.

Axle load truck / trailer active

Receives axle load information from truck/trailer.

Tire pressure of truck / trailer active

Set this to ON, to measure the tire pressure of trucks/trailers.

Telltale truck

Receives telltale truck information.

G-Box active

Receives data from G-box.

TX-FLEX active

Set this to ON, to make the application available for data sharing.

Max. picture size from device to server (10 KB) *

Type the maximum file size that can be sent through the TX-FLEX application on the device to the server.

Communication type

Select the communication type for the TX-FLEX connectivity.

Remote update type

Select the remote update type.

Minimum version

Select the earlier version of the TX-FLEX application for the device.

FUNCTIONAL BLOCKS

Add functionality to TX-FLEX

·       Signature: add options to the Signature screen

·       Process: add options to the Planning screen

·       Pallet: add options to the Pallet screen

·       Picture: configure Picture options

·       Scan: configure Scan options

·       Usage at work: configure At Work module

·       Usage at home: configure At Home module

·       General: activate other options

·       Interface permissions: configure interface access

·       WABCO inspection app configuration: Set specific parameters for the inspection app.

Package type

Define the software package: debug, rnd, fieldtest, pre-production, production, partial build.

Time zone

Time zone

PTO kit active

Set this to ON, to activate the Power take-off (PTO) kit. This is a type of device that transfers the engine's mechanical power to another equipment.

SOS alarm via UI button

·       View an SOS button on the on-board computer screen.

·       Sends an instant alarm message to the back office.

SOS alarm via HW button

Activates SOS button via PTO1 or via PTO kit (PTO2-4), if active.

Sends an instant alarm message to the back office.

Harsh braking alarm (dm/s2)

Alarms when the harsh braking threshold (x dm/s²) exceeds.

The harsh braking alarm informs the back office of a sudden and high deceleration of a vehicle. These situations may be caused by a driver for not paying attention to the road and not anticipating traffic well

SMS position active: This is a backup functionality for GPRS communication, which sends door lock commands and positions via SMS when GPRS communication is temporarily unavailable.

·       SMS home base number: Type the SMS home base number.

·       SMS central number: Type SMS central number.

SMS position active

Active: This is a backup functionality for GPRS communication which sends door lock commands and positions via SMS when GPRS communication is temporarily unavailable.

·       SMS home base number:

·       SMS central number:

Anti-start

Select the way to activate the login mode.

Remote diagnostics

Activate remote diagnostics on this vehicle.

No communication alarm

Set this to ON, to receive notification when vehicles lose connectivity. Send alarm after x minutes / hours / days.

Suppress driving

Search an activity in the instruction set for which you want to activate the setting.

For example, select “Private” and activate “Suppress driving”.

As a result, when the driver selects this activity (Private) on the on-board computer, the activity is not tracked and it doesn’t change to driving when driving is detected. This is used for activities for which the driver is not paid and should be kept private.

Note: The driver needs to select another activity (for which “Suppress driving” is not active) to deactivate this.

Secure UI while driving

Disables screen usage for drivers when driving is detected.

Message as pop-up

Displays text messages as pop-up notifications.

Block device volume

Type the percentage level at which you want to limit device volume.

Note: Driver cannot change the device volume.

Allowance entry

Driver can add allowances for the previous or current day.

Planning UI

Version 1: Previous planning interface UI with expand buttons

Version 2: New planning interface UI with Start button in planning overview and info icon (i).

Planning security

Active: Used fixed planning order (only 1 planning item can be started and is defined in the back office).

Weight (ton)

Type the weight of the vehicle.

Height (m)

Type the height of the vehicle.

Length (m)

Type the length of the vehicle.

Width (m)

Type the width of the vehicle.

Axle weight (ton)

Type the axle weight of the vehicle.

Editable dimensions

Set this to ON, to allow drivers to modify dimensions of the vehicle.

ADR

Set this to ON, to avoid non-ADR routes in the route calculation.

Accord Dangereux Routier (ADR).

It is the European regulations related to international transport of dangerous goods by road.

Editable ADR

Set this to ON, to allow drivers to modify ADR settings.

Select vehicle type Car

Select the vehicle type: car, van, long-distance truck, short-distance truck, custom 1-3.

On device

Vehicle type is hidden, visible or selectable by the driver.

Name

Type a name for the selected vehicle type.

Note: The options below are available only when a custom vehicle type is selected in the Name list.

Calculation

Calculation method used in navigation: fastest route/ shortest route.

Allow toll roads

Set this to ON, to allow toll routes in the calculated route.

Allow highways

Set this to ON, to allow highways in the calculated route.

Allow ferry

Set this to ON, to allow using ferries in the calculated route.

Vehicle

Select the vehicle type for which you want to adjust the calculation profile.

Level 1 (%)

Percentage of max. speed for level 1 routes.

Level 2 (%)

Percentage of max. speed for level 2 routes.

Level 3 (%)

Percentage of max. speed for level 3 routes.

Level 4 (%)

Percentage of max. speed for level 4 routes.

ETA calculation (%)

Percentage of max. speed for ETA calculation.

Traffic info active

Set this to ON, to receive real-time traffic information in the navigation module.

The Traffic info:

·       does not impact the navigation routing algorithm.

·       does not calculate different routes based on the current traffic (except the closed roads) and does not recalculate or propose alternative routes when sudden traffic incidents arise.

·       informs users and helps them act on the situation.

Timeout (min.)

Standstill timeout before traffic synchro is paused.

Unit: Minutes, Range 0-1000

Variable traffic interval (min.)

Refresh interval for variable traffic synchro.

Unit: Minutes, range: 0-100.

Variable traffic radius (km)

Radius around vehicle for variable traffic synchro.

Unit: Km, range:0-1000

Fixed traffic interval (min.)

Refresh interval for fixed traffic synchro.

Unit: Minutes, range: 0-100.

Fixed traffic radius (km)

Radius around vehicle for fixed traffic synchro.

Unit: Km, range: 0-1000